Electrical · Canada

FLHA for electrical equipment inspection

By SiteSortedBuilt from provincial OHS law and CCOHS guidance · How we write and check theseUpdated November 9, 2026

Provincial OHS law requires hazards to be assessed and controlled before work starts. A field level hazard assessment (FLHA) for electrical equipment inspection is done on site at the start of the shift and again whenever conditions change.

It lists the tasks, hazards and controls, and every worker signs on before starting and signs off at the end of the shift. The main hazards are electric shock from live wiring, electric shock from cords and power tools, lifting and carrying heavy loads and working in an occupied home or building.

Make this FLHA now Word template PDF

FLHA example: electrical equipment inspection

This is a complete FLHA for electrical equipment inspection, with 5 job steps. Open it in the builder to add your site, crew and signatures, change anything, and download a PDF. Or download the free Word template below and fill it in by hand.

Field Level Hazard Assessment (FLHA)

Portable electrical equipment inspection · Electrical · Example

Document FLHA-001 · Rev 1

Job steps, hazards and controls

#	Job step	Hazards	Risk before	Controls	Risk after
1	Agree with the client which items to test and when they can be unplugged	Working in an occupied home or building	Medium	Plan noisy, dusty or risky work for when the building is empty. Elimination Close off the work area with barriers, plastic sheeting or locked doors, and put up signs. Engineering (guarding) Keep fire exits and paths clear at all times. Administrative Tell occupants before you turn off power, water or gas, and before noisy or dusty work. Administrative Lock away tools, chemicals and materials each day, out of reach of children. Administrative Clean up dust and debris at the end of each day. Administrative	Low
2	Visually inspect each lead and tool for damage before testing	Electric shock from cords and power tools Cuts from sharp edges	High	Use battery-powered tools where you can. Substitution Use GFCI protection on all temporary power and portable tools. Engineering Keep cords off the ground and out of water, using stands or hooks. Engineering Check cords, plugs and tools before every use. Tag out and remove anything damaged. Administrative Do not use tools in rain or wet areas unless they are rated for it. Administrative Wear safety boots and dry gloves. PPE Deburr or cover sharp edges, and fit edge protectors on exposed sheet metal. Engineering Use knives with retractable or self-retracting blades. Engineering Cut away from your body and keep your other hand clear. Administrative Put used blades in a blade bin or sharps container. Administrative Use two people to handle large sheets of metal or glass. Administrative Wear cut-resistant gloves and long sleeves. PPE	Low
3	Test each item with the tester, keeping hands clear during the leakage and insulation tests	Electric shock from live wiring	Critical	Isolate the power before any work. Do not work live. Elimination Lock out and tag the isolation point with your own personal lock and danger tag. Engineering (guarding) Test before you touch: prove dead at the point of work with a tested voltage tester. Engineering Only licensed electricians do electrical work, to the Canadian Electrical Code and provincial rules. Administrative Check for back feeds from solar, batteries and generators that can keep a circuit live after the main switch is off. Administrative If energized work cannot be avoided, use a permit, a safety observer and insulated tools, following CSA Z462. Administrative Wear insulated gloves, arc-rated clothing and a face shield when testing or working near live parts. PPE	Medium
4	Tag items that pass, and take failed items out of service with a danger tag	Electric shock from cords and power tools	High	Electric shock from cords and power tools: see step 2 for the full controls Administrative	Low
5	Coil leads, keep walkways clear and record results	Slips and trips Lifting and carrying heavy loads	High	Plan walkways and keep them clear of materials, hoses and leads. Elimination Run leads and hoses overhead on hooks or stands, or along walls, not across walkways. Engineering Fill or cover holes, and lay boards or mats on muddy access paths. Engineering Clean up offcuts, packaging and spills as you go, not at the end of the day. Administrative Keep work areas, stairs and access paths well lit. Administrative Wear safety boots with good grip, laced up. PPE Plan to avoid carrying: have materials delivered, and old items picked up, as close as possible to where they are used. Elimination Use lighter or smaller loads: order smaller bags and shorter lengths, and drain or break down old items before moving them. Substitution Use trolleys, pallet jacks, hoists, vacuum lifters or equipment instead of carrying by hand. Engineering Use a two-person lift for anything heavy, long or awkward. Plan the route first and clear it. Administrative Keep the load close, back straight and no twisting. Turn with your feet. Administrative Rotate tasks and take breaks on long lifting jobs. Administrative Wear gloves for grip and safety boots to protect your feet. PPE	Medium

PPE

CSA green triangle safety boots (CSA Z195)Safety glasses (CSA Z94.3)N95 respiratorWork glovesCut-resistant glovesRubber insulating glovesArc flash PPE (CSA Z462)

Plant and equipment

Electrical test meter

Permits and plans

Lockout permit

Emergency

Call 911. Add the nearest hospital, the muster point and the first aid attendant for your site.

Sign-off

Supervisor and every worker sign to confirm they have read and understood this FLHA, then sign off at the end of the shift.

Free FLHA template for electrical equipment inspection

Word (.docx) and PDF, Letter landscape, no email needed. Fill in your site details, then print or send it.

Word template (.docx)PDF template

Make yours in 2 minutes

Same document, filled in for your job. Answer a few yes or no questions, the crew signs on the phone, and you send the PDF.

Start this FLHA

Pre-start checklist for electrical equipment inspection

Tick these off before work starts. They come from the hazards, permits and equipment in this job.

FLHA read, explained and signed by everyone on the job
Lockout, tagout and test before touch done before work starts
First aid attendant, first aid kit and emergency number (911) confirmed
PPE checked and worn: CSA green triangle safety boots (CSA Z195), safety glasses (CSA Z94.3), N95 respirator, work gloves

The safe sequence of work

Agree with the client which items to test and when they can be unplugged
Visually inspect each lead and tool for damage before testing
Test each item with the tester, keeping hands clear during the leakage and insulation tests
Tag items that pass, and take failed items out of service with a danger tag
Coil leads, keep walkways clear and record results

Hazards to watch on electrical equipment inspection

The hazards most specific to this job, and the step where each one comes up.

Step 2, 4Electric shock from cords and power toolsDamaged cords, plugs or tools, or water near power, give the user an electric shock.

Step 1Working in an occupied home or buildingResidents, staff or children wander into the work area and get hurt, or the work blocks exits or cuts off power or water while people are inside.

Step 5Slips and tripsWorkers slip on wet or muddy ground or trip on leads, offcuts and uneven ground, causing sprains, broken bones or head injuries.

Step 2Cuts from sharp edgesSheet metal, glass, blades, cable tray and offcuts cut hands and arms.

Step 3Electric shock from live wiringContact with energized wires, electrical panels or equipment gives an electric shock or arc flash burn that can kill.

Step 5Lifting and carrying heavy loadsLifting, carrying, pushing or twisting with heavy or awkward loads strains the back, shoulders or knees.

Highest risk on electrical equipment inspection: Critical before controls (B), down to Medium after controls (A), on the Canada 5 by 5 risk matrix (possible and fatality becomes unlikely and lost time injury).

What changes on your site

This example covers the job itself. Your site may add more. Add controls for any of these that apply (the builder asks you these as yes or no questions):

Could anyone fall 3 metres or more, or fall any distance into machinery, water, a hazardous substance or through an opening?
Will anyone use a ladder or stepladder?
Will anyone work on a roof?
Is there a fragile roof, skylight or clear roof sheet?
Will you use a scaffold or mobile tower?

Why FLHAs get rejected

Prime contractors and COR auditors send documents back for these reasons. This example avoids them, but check yours too.

End of shift boxes already say "None" when the form was signed at the start of the shift.
One FLHA reused for days or weeks, or a "review by" date a month away, when the work and conditions change daily.
No time of assessment and no record of any revision, which Alberta s.7(3) requires.
Workers signed that they "read" it, but nothing shows they took part, which Alberta s.8(1) requires.
Work at height with no fall protection plan where the province requires one, or no written rescue procedure for workers using fall arrest.
Permits or locates required on site but no permit or ticket numbers recorded.
No re-assessment entry after an obvious change such as weather, a new task or a new crew member.

Rules by province for electrical equipment inspection

Province or territory	Key local rule	Regulator
Ontario	Fall protection (O. Reg. 213/91 s.26) applies at a fall of more than 3 m, more than 1.2 m where the work area is used as a path for a wheelbarrow or similar equipment, and at any height into operating machinery, water or other liquid, a hazardous substance, or through an opening.	Ontario Ministry of Labour, Immigration, Training and Skills Development
British Columbia	Fall protection is required where a fall of 3 m or more may occur (s.11.2). A written fall protection plan is required at 7.5 m or more where there are no permanent guardrails (s.11.3).	WorkSafeBC
Alberta	A hazard assessment must be done before work begins, and before a new work site is built (OHS Code s.7(1)). The results must be written down with the controls (s.7(2)).	Alberta Occupational Health and Safety
Quebec	Guardrails (Safety Code s.2.9.1, as amended by Decret 63-2025) are needed where a worker could fall into liquid or a hazardous substance, onto moving parts or dangerous equipment, 1.2 m or more when using a vehicle, 1.5 m or more when handling a load, and more than 3 m in all other cases.	CNESST (Commission des normes, de l'equite, de la sante et de la securite du travail)
Manitoba	A prime contractor is required whenever more than one employer or self employed person works on the site at the same time (Act s.7).	Manitoba Workplace Safety and Health Branch
Saskatchewan	An occupational health committee is required at 10 or more workers of one employer (Act s.3-22).	Saskatchewan Ministry of Labour Relations and Workplace Safety, OHS Division
Nova Scotia	Workers must be trained in fall protection before using it or working in, supervising or planning work in a fall protection area, with a refresher at least every 3 years (WHSR s.21.19).	Nova Scotia Department of Labour, Skills and Immigration, Safety Branch (OHS)
New Brunswick	Fall protection is needed from 3 m above water or the nearest permanent safe level (Reg 91-191 s.49(1)(a)(i)).	WorkSafeNB
Newfoundland and Labrador	Give written notice to the minister before starting a construction project that will last 30 days or more, with the site, location, type of work and number of workers (Regs s.8).	Government Services, Occupational Health and Safety Division
Prince Edward Island	Fall protection is needed from 3 m above the nearest safe surface or water (Fall Protection Regulations s.2(1)(a)).	Workers Compensation Board of PEI, OHS Division
Yukon	Every employer must do hazard assessments with the committee, representative or workers, and redo them after significant changes or incidents (Regs s.1.03.01).	Yukon Workers' Safety and Compensation Board
Northwest Territories	Fall protection is needed from 3 m, or lower if there is a risk of injury (s.119(1)). Guardrails are needed for falls of 1.2 m to 3 m at permanent work sites (s.119(2)).	Workers' Safety and Compensation Commission (WSCC)
Nunavut	No 911. To reach the RCMP in an emergency, dial your community's first three digits then 1111 (Iqaluit: 979-1111). Put the local fire, ambulance and RCMP numbers on every FLHA.	Workers' Safety and Compensation Commission (WSCC)

Questions

Do I need an FLHA for electrical equipment inspection?

Who signs the FLHA?

The supervisor and every worker take part in the assessment and sign on before work starts, then sign off at the end of the shift. Review it and re-sign whenever the task or conditions change.

How long do I keep it?

Keep completed hazard assessments for at least 3 years (COR auditors sample the last 12 months). Review this FLHA and re-sign whenever the task, crew or conditions change.

What PPE is needed for electrical equipment inspection?

Usually CSA green triangle safety boots (CSA Z195), Safety glasses (CSA Z94.3), N95 respirator, Work gloves, Cut-resistant gloves, Rubber insulating gloves, Arc flash PPE (CSA Z462). The site rules may add more, so check with the general contractor.

More electrical FLHAs

FLHAElectrical Panel Replacement10 steps FLHAHouse Rewiring9 steps FLHAOutlet Installation5 steps FLHALighting Installation5 steps FLHAElectrical Fault Finding6 steps FLHAEV Charger Installation6 steps FLHASmoke Detector Installation5 steps

Toolbox talks for this job

Toolbox talkWorking at Heights Toolbox talkOverhead Power Lines Toolbox talkExtension Leads and Power Tools Toolbox talkWorking in Cold Weather

Blank FLHA template: free FLHA templates. Also for other countries: Australia (SWMS) · United Kingdom (RAMS) · United States (JHA)